Clik here to view.
Definitive AABow
Definitive AABow Preface This is my entry into the Spring into Homemades writeup contest. I noticed while looking for a first homemade to build that the AABow seemed simple enough, but there weren't...
View ArticleClik here to view.
Easy Backpressure Blaster & Foam Launcher Of Wonder
On my recent trip to go warring in Canada, I got an idea in my head, and discussed it briefly at dinner with a few of the other Nerfers. Piston valve (or "backpressure") tanks rely on a small piston or...
View ArticleClik here to view.
FDL-1: Fully 3D Printed Robotic Blaster
Hey everyone, I wanted to introduce you guys to the FDL-1. Some of you may have seen a prototype version in a Drac video a few months back and anyone who was at DartCon during NvZ this year probably...
View ArticleClik here to view.
Extension Spring Lettuce & Tomato
So I don't have a 3D printer. I don't plan to ever get one because unlike you shlubs I have access to a ton of machine tools at work. So Nyah Nyah. Anywho, the ESLT is an interesting doohicky. I've...
View ArticleClik here to view.
Trishula: 3 rods and 3 kinds of springs
I don't want to take over snakerbot's thread so let's move this here. Support for Constant-Force Spring pair (21lb total draw). Support for ESLT extension spring. Support for any 11-inch compression...
View ArticleClik here to view.
Extension Spring Rainbowpup post-construction writeup
I had planned to do a full writeup with step-by-step instructions and pictures and all that, but as months of non-work turned to years of non-work, I decided I should get this out to the community in...
View ArticleClik here to view.
Bullpump: Tag-Team Collaboration
This is very similar to the Bullpump's that others have made (particularly MakeItGo), but we both felt that a write-up and public files for this type of blaster is overdue. I have other things I'm...
View ArticleClik here to view.
Sear Carbine Writeup
The idea of using some type of sear to lock a bolt in place has been used on real-steel firearms since the advent of the machine gun, due to the simplicity and self-locking action of the mechanism. In...
View ArticleClik here to view.
Piranha - A Stubby K26 Blaster With a Pulley
Full-length K26 blaster with a 12-inch plunger tube, 6-1/4" draw, and a hopper. Total length is 19 inches. It's a normal Rev.3 Plusbow catch only in reverse because the catchplate is ahead of the frame...
View ArticleClik here to view.
[WIP] ACTUAL Advanced Sear Carbine writeup
godfuckingsamnit Of course, of fucking course this crashed. I had to rewrite this damn thread. Anyway, this is my take on the sear carbine. I've had like 7 people ask me for this, and half were on NH...
View ArticleNerf vacuum cannon
In the never ending quest for more FPS, I've been toying with the idea of a vacuum cannon for firing nerf darts (possibly megas). I haven't been able to find anything solid about anyone having tried...
View ArticleClik here to view.
3D Printed Big Blast Triggers
War-tested design, fits in shell without any cuts. I use some silicon grease to lubricate all surfaces of the trigger, it hugs the shell more tightly than stock. You'll need to file or sand the side...
View ArticleClik here to view.
Finished Advanced Sear Carbine writeup
godfuckingsamnit Of course, of fucking course this crashed. I had to rewrite this damn thread. Anyway, this is my take on the sear carbine. I've had like 7 people ask me for this, and half were on NH...
View ArticleClik here to view.
Caliburn
This project is getting underway and I've ordered the parts. This design shares many components with the PCSR I built. The difference is that the foregrip and pusher rod from the PCSR is replaced with...
View ArticleClik here to view.
Machined PCSR Write-Up
Write-Up: http://captainslug.com/pcsr.htmlTemplate Set: http://www.captainslug.com/nerf/pcsr_templates.docPartlist: http://captainslug.com/nerf/pcsr_partlist.xlsI've made three of these so far. I'm...
View ArticleClik here to view.
Caliburn: Mag-fed Pump-action Springer
The prototype is finished. I just need to finish testing this over the next few days. A few of you are already aware of this and are working on a 3D-printed version. Since making the design and making...
View ArticleClik here to view.
Durendal: My take on a Rainbow Catch
This design was inspired by both Lucian's use of cross dowel nuts, and the Rainbow catch. Adding both of these things provided an opportunity to cut the part count of a Plusbow (even a Rev.3) in half....
View ArticleAdvice on Pump Snaps?
Hi I am new to nerf homemades, I was wondering if a pump snap could compete with other competition if I went to a nerf war.
View ArticleClik here to view.
Jankytron 3000 (JT3K)
An airblaster of the shittiest design, this is as janky as it gets. Sprinkler valve, AS-20 pump, 36" copper and cpvc barrel, and 300 fps with a 20 second reload time. Immensely accurate, sacrificing...
View ArticleClik here to view.
JSPB3D
Introduce: Hi! This is my new work, part of the use of 3D printing, it is very simple production, just need to put it together , glue together, and you can change the style you want. This model...
View Article